Lots of Painted Pumpkins!

Hello stamping friends!  Do you like autumn and especially all the pumpkins in the many sizes, shapes, and colors they grow in?  I do, I do!!  I kind of went a little crazy the last few days playing with the Painted Pumpkins bundle and those fun coordinating stencils.  I seem to have a whole pumpkin patch growing on my worktable and now I'm creating cards with them. So much fun!   Are you ready for a pumpkin patch visit?  I've got five cards ready for sharing already, so instead of a separate post and going in depth on each one, it's going to be a fairly quick overview on each card.  OK? 

I'll start with this one.  Using the stencils and Basic White cardstock, I made two batches of pumpkins.  One batch was using just Crisp Cantaloupe for all three layers of stencils and darkened the color each stencil.  On the last stencil, a little Pumpkin Pie ink was added to it to darken the color on some of the pumpkins.  The fourth stencil makes the stems  which I colored with Crumb Cake and just a tiny bit of Pecan Pie to darken.  (The stencils can make 6 pumpkins at a time.)  

After wiping and drying the stencils, I did the same thing with Crumb Cake ink on the layers of stencils.  On the 3rd stencil layer, a little blush of Pumpkin Pie was added to a few like you can see on the front pumpkin on this card.

All the pumpkins were die-cut along with a bunch of leaves and curly stems.  For the leaves on this card, Lost Lagoon cardstock was used.

A layer of Soft Sea Foam cardstock was stenciled with the all-over leaf background stencil using Soft Sea Foam ink.

The card base is Crisp Cantaloupe that measures 8 1/2" x 5 1/2".  The stenciled Soft Sea Foam layer measures 3 3/4" x 5".  It's backed with a Lost Lagoon layer that measures 3 7/8" x 5 1/8".  The two layers are attached together with adhesive then added to the base with Dimensionals.

All six pumpkins and the greenery were attached with adhesive, except for the front pumpkin which was popped up with Dimensionals.

The sentiment was stamped onto a 3/4" strip using Crumb Cake ink.  It's trimmed and added to the card front with Dimensionals.

Several of the 2026-2028 In Color Butterflies were added to the design.  I used the Crisp Cantaloupe and White butterflies for this card.

The next card is very similar in coloring as I was using more of the pumpkins made for the last card.  This time, the Lost Lagoon layer was attached to the card front with adhesive.  Then the stenciled Soft Sea Foam layer was attached to it with Dimensionals.

The fence from the die set was used to cut some Wood Grain Wonder DSP.  This has not only the printed graining, but the die also has graining when it cuts.  The sections of fence were attached with adhesive about an 1" from the bottom of the card front.

Then four of the pumpkins were arranged staggered in front of the fence and attached with Dimensionals.  Lots of the Lost Lagoon leaves and curly stems were tucked in around the pumpkins and the fence.

The sentiment used here is from the Thanks & Giving stamp set that is an Online Exclusive set.  I don't remember where I got the circular die from, but it worked.  The sentiment was stamped with Lost Lagoon ink to match the leaves.  This is popped up in the corner with Dimensionals.

I decided not to add any sort of bling to this design.  It was nice as it was.

For this next card, I went back to the pumpkin stencils and made darker pumpkins.  These started out with Pumpkin Pie ink for the three layers. Then some Cajun Craze ink was added on the 3rd stencil to add more depth to them.  The stems were still Crumb Cake ink.

This time a batch of leaves and stems were die-cut from Mossy Meadow cardstock.

The card base is Crumb Cake cardstock.  There is a layer of Mossy Meadow cardstock that measures 5 1/4" x 4".  This was embossed with the new Softly Woven 3D Embossing Folder.  This detail shows up so nicely here.  It was attached to the card base with "green glue" to hold securely.

There is a layer of the checked 2026-2028 In Color Gingham Gallery DSP in Golden Glow cut.  This measures 3 1/4" x 4 1/2".  

Before attaching to the base, a 12" piece of Early Espresso jute from the Neutrals Jute Combo Pack was cut.  Then it was unraveled to get three strands instead of one bulky one.  This was wrapped around the DSP layer and tied into a knot.  Then the layer was attached to the embossed layer with "green glue".  

Next a piece of Crumb Cake cardstock was cut to 2 3/4" x 3".  This piece has some splattering from Early Espresso ink and water mix and flicked on with a water painter.  After it dried, a little Early Espresso ink was blended on the edges with a Blending Brush.

The larger pumpkin was attached with adhesive with the smaller one added with Dimensionals.  The leaves and curlicues were tucked in around the pumpkins.  

The sentiment comes from the Thanks & Giving set. It's stamped on Basic White with Early Espresso ink.  Then fussy cut around the words.  It's attached with Dimensionals.

Three of the Sunset Sparkle Sequins in an orange-y color were added to the design to finish.

I still had more pumpkins to play with yet.  These are two of the Pumpkin Pie/Cajun Craze and one of the Crumb Cake with a blush of pumpkin on it.  This time I die-cut Old Olive leaves and stems to use.

The card base is Golden Glow that measures 8 1/2" x 5 1/2".  The wood-grain print is from the Country Woods DSP in a weathered wood look.  It measures 5 1/8" x 3 7/8".  It's backed with a layer of Early Espresso cardstock.  This measures 5 1/4" x 4".  The two layers are attached with adhesive, then attached to the card base with adhesive also.

The three pumpkins are arranged on this, then attached with Dimensionals.  The leaves and vines are tucked in all around them.

The sentiment this time comes from the Elegant Leaves stamp set.  They are stamped with Early Espresso ink on a 1/2" x 4" strip of Basic White cardstock.  This is layered onto an Early Espresso cardstock piece that measures 3/4" x 4 1/4".  It's attached with Dimensionals.

A short length of a Neutral Jute Combo Pack in Pecan Pie is tied into a bow.  The ends are frayed.  Then it's attached at the bottom corner of the sentiment strip using a Mini Glue Dot.

Five of the Sunset Sparkle Sequins in the orange-y color are scattered around the design to finish.

Okay, we have come to the last design and the one I think I like the most.  Two of the pumpkins this time are made with Pumpkin Pie/Cajun Craze inks.  The middle one has Timid Tiger added so it's a little brighter.  The leaves and vines are cut from Peaceful Pine cardstock this time.

The card base is Peaceful Pine cardstock.  It measures 8 1/2" x 5 1/2".  There is a layer of Country Woods DSP added.  This measures 5 1/4"x 4".  It's attached to the card base with adhesive.

There is a gate cut from another print of the Country Woods DSP that is quite dark but has a nice, weathered look.  The fence section was not cut this time, just the gate.  It's attached to the card front at the left side with the right edge not glued down yet.  

One of the pumpkins was tucked partially behind the gate, then the gate was fully attached over this.

The other two pumpkins were attached in front of the gate using Dimensionals.  The leaves and vines were tucked around the pumpkins and into the gate.

The sentiment is another from the Thanks & Giving stamp set.  The words are stamped on a piece of Basic White cardstock using Early Espresso ink.  It's die-cut with a small Perennial Postage die. 

After die-cutting, a Blending Brush and Pumpkin Pie ink was added lightly around the edges.

A large bow was made from Linen Thread and attached behind the sentiment.  Then Dimensionals were added behind to hold in place.

Several Low-Profile Sparkle Dots in the dark blue color were added to the design.  I liked how the golden sparkles in the dots really tied in with the warm glow of the pumpkins.

Whew!!  That was a lot to get through.  I hope I gave you enough info to CASe any of these that you would like to try.  If you have questions about any of these specifically, please feel free to contact me at sharoncarr50@gmail.com .  I'm always happy to talk with you about anything I've made or any other questions you might have.

Thank you for spending your time here with me today.  Yes, I've given you a lot to take in, but I truly hope you give this bundle of goodies a try.  I totally love these stencils for coloring the pumpkins.  It's so easy to add a blush of another color over what you've already made, and it changes the look so much.  It's definitely something to play with and try combining different colors for these cool pumpkins.  Time for a color play date!

Happy stamping and creating,

Sharon

Lovely Arrangements Fun Fold

Hello my friends!  Are you having a good day?  I feel like I'm on a roll with getting this card finished and still have time to share it on a blog post today.  Don't you love it when things actually come together like you think they will?  It doesn't happen often so you need to enjoy it while you can!  Since I haven't made any fun folds in a while, it seemed like today would be a good day to do that.  I've shared before that fun folds are not what I'm good at - not at all!  But I have found some fairly simple ones over the years that I enjoy making, and the card today is one of those simple fun folds.  Today's card features the Brushed with Beauty Designer Series Paper.  This is such a pretty pack of paper.  I love the color mix, and the prints are great for designing.  Let's dive right into this card.

Here's the card all folded up and ready to go into the envelope.  You can see that the DSP really makes up the basis of the card with the folds giving the card its stability.  Let me give you all the information on cutting the pieces first and then we'll cut and score the DSP and put it together.

Using the Branching Out dies:

3rd largest - Mossy Meadow

4th largest - Very Vanilla

5th largest - Very Vanilla

Cut Very Vanilla cardstock at 2 1/2" x 5" and

1/2" x 2 1/2" (sentiment)

Also cut a 2" strip of Very Vanilla for die-cutting flowers

Cut Mossy Meadow cardstock at 2 5/8" x 5 1/8"  and 5/8" x 2 5/8" (sentiment layer)

Also cut a 2" strip of Mossy Meadow for cutting leaves

In the center area of both Very Vanilla Branching Out die-cuts, use a Blending Brush and Crumb Cake ink to lightly add a blush of color.  This will help the flowers stand out from the vanilla background.

Stamp two larger flowers and one smaller flower with the Lovely Arrangements stamps.  Use Crumb Cake ink and add Early Expresso marker onto the stamens before stamping onto the Very Vanilla strip.  Die-cut these 3 flowers with the matching dies.

Also stamp 3 clusters of three leaves using Mossy Meadow ink on Mossy Meadow cardstock.  Die-cut these with matching dies.  Die-cut the 2 single leaves from Mossy Meadow cardstock.

Stamp the birthday sentiment from the Lovely Arrangements set onto the 1/2" piece of Very Vanilla cardstock.  Use Mossy Meadow ink for this.

On the smaller vanilla Branching Out die-cut, stamp the first part of the sentiment (from Perennial Postage set) at the top with Mossy Meadow ink.  Clean and dry the stamp well, then ink up the 2nd part of the sentiment and stamp it at the bottom of the die-cut.

Stamp another sentiment from the Perennial Postage set onto the larger Very Vanilla piece for the inside of the card.  Use Mossy Meadow for this again.

Ok, I think we've got everything stamped, die-cut and ready to go.

Cut the Brushed with Beauty DSP print to measure 11 1/4" x 5 1/2".  Then score at 1", 4", and 7".  Fold this to make a W fold with the short flap on the left side.

Since this picture is right here, we'll start from the back.  Attached the vanilla to the mossy cardstock with adhesive.  Cut apart one set of stamped leaves and attach as shown.  Then attach layers inside the card making sure they don't show beyond the flap when it's closed.

The center flap has the smaller vanilla layer attached with the smaller flower and the two single leaves attached to the center of the layer.

Now for the front layer.  Attach the two layers of die-cuts together.  Attach the sentiment strip to the Mossy Meadow layer.  Position flower, leaves and sentiment on this layer.  Attach one flower flat tucking one set of leaves under this.  Attach 2nd flower with a Dimensional in the center.  Cut apart remaining leaves and tuck in under this flower.  Attach the sentiment with Mini Dimensionals making sure to keep them only on this layer.  None on the overhanging edge.

To attach this layer to the card front, I used Tear & Tape.  There is a strip along the left edge of the layer from top to bottom.  This holds the layer firmly on the small edge of the DSP.

This card uses some antique brass looking dots that blend nicely with the more neutral colors used here.  These are retired, but there are similar current ones.  

I hope these directions make sense to you as you create along with me.  If you have any questions, get in touch and I'll try to clarify any problems you have.  I totally love how this card evolved and the finished look.  Give it a try.  There are so many lovely DSP prints that it's a shame you can only see one side of them.  I like to find ways to get the full effect of the pretty prints.  If you make this with other prints, I'd love to hear what you've created!  Please share.

Since it's February now, that means it's also time to redeem any of those Bonus Days rewards you earned.  Don't forget, redemption is only in February.  That's it, so don't miss out!!

Thanks for stopping by again to see what's been going on here.  I've been having fun holed up in my stamp room trying to ignore all the cold, snowy-icy-rainy weather we've been having.  I think I need to come up for air pretty soon!  Where's that sunshine?

Happy stamping and creating,

Sharon

Flash Back Time

Hey there!  I've been working on the cards that will be sent out to the home-bound people from our congregation next week.  It usually takes me at least several days or more to think about what the theme for the month will be like fall, Christmas, summer, etc and what I want to use to create the cards.  With it being September already, that brings to mind going to the apple orchards to pick apples and getting cider and doughnuts of course.  So far, I haven't found much in the line of apple orchards around here.  That means I'm just working from memories right now.  Then to add to my thought process, I had a devotion that was talking about the apple of God's eye.  Figured I definitely had to work with an apple theme this month.  Since I have nothing current from SU! that features apples, it was time to dig around in the retired stash to see what I could find.  That's what I'm sharing today.  If you're only interested in current items, you might want to bail now.  I think the stamp I chose is from more than 5 years ago.  Do you have any of those "oldie but goodies"?  Come and join me for a little retro stamping!

Doesn't this look like it's a fresh-picked MacIntosh apple?  (And no worms!!)  It was so much fun creating this design.  It's not quite done yet.  I still have to finish the inside of the card to incorporate my Bible verse.  Then it will be ready to go in the mail.  Let's get started.

The stamp set used here is the Harvest Hellos with the coordinating apple/pumpkin punch.  Do you remember this?  Instead of stamping the apples before punching, I punched 25 of them from Basic White cardstock.  Then I got out both Lemon Lime Twist and Real Red ink pads and the Blending Brushes I'd be using.  Each one of the apples were individually inked with Lemon Lime Twist on the right side.  Then each of them has Real Red blended onto the left side with the color over-lapping onto the green just like a real apple.  I loved how these apples turned out!

After coloring all the apples, I used the same punch for the stems punched from Pecan Pie cardstock.  The leaves were punched from Granny Apple Green to make them a little darker than the apple.  After punching out the leaves, each one was stamped with the coordinating leaf stamp in the set using Garden Green ink.  All these pieces were set aside until I was ready for them.

Next was the layering that I wanted to use here.  I had just received the new Branching Out Dies.  Let me just say I love the shape of them!  I chose the smallest die to cut a piece of Basic White cardstock.  Then I took the 4th smallest size and die-cut some Real Red plaid DSP from another retired pack.  I was just going through all my papers to find a Real Red print of some kind that went with the apple.  So, this is it.

The card base I chose is Real Red.  It's 8 1/2" x 5 1/2", scored and folded in half.  The layer is a quarter sheet of Lemon Lime Twist to match the apple.  It needed something on this layer to give it some interest.  I remembered the new Gathering Leaves Embossing Folder that just came out.  It has a nice overall pattern that fit nicely with the design of the card so far.  This layer was attached to the folded card base using "green glue".

The sentiment was next.  It is also part of the Harvest Hellos stamp set.  The smallest die in the Perennial Postage die set was used to die-cut Basic White cardstock.  After cutting, the sentiment was stamped using Pecan Pie ink.  It needed a little definition, so a small bit of Pecan Pie ink was sponged on the outside edges very lightly.

The two die-cut layers were attached to the center of the card using "green glue".  I wanted all the layers to be fairly flat with only the sentiment and the apple raised up on Dimensionals.

After getting all the layers arranged, three of the Holographic Dots were added to the design.  It's amazing how these gems picked up both of the main colors so nicely.

Ok, there you have your retro stamping class for today.  When I make the cards each month for these lovely people, I try to incorporate some of my retired stash of goodies.  If I don't get some of these supplies used, there won't be room for me in the house anymore!  At least that's what my hubby keeps telling me!  Hope you had fun playing with some of my old standbys.  Maybe this wasn't what you had in mind for today, or maybe this inspired you to dig through your treasures to see what you might have forgotten you had.  Thank you for taking the time to see what's going on in my stamp room.

Happy stamping and creating,

Sharon

Quick Sketched Butterflies Cards

Hello friends!  The sun is shining today, and life is plenty good.  I have to get out and enjoy these lovely days.  Do a little walking maybe.  I'd say walking to stay in shape, but that shape part has turned into a lost cause, I think.  But it is nice being out in the sunshine.  That leads me to the cards I'm sharing today.  They look like spring with the color choices and butterflies.  Let's just hurry spring along a bit by stamping it!

I made two of these cards because I needed them.  I had all the components cut and ready to assemble.  Only when I was putting them together, I couldn't decide where to attach the sentiment, so I did one each way.  Maybe you can tell me which way you like better.

I started with a Basic White card base that measures 8 1/2" x 5 1/2" and is folded in half.  

I had a long 12" x 2" strip of the green-ish printed DSP from the Bloom Impressions DSP that was one of the Sale-a-bration items.  Yes, I know Sale-a-bration is over and done, but I'll bet most of you have some of this still in your stash.  Why not use and enjoy it?  

The strip was cut to 5 1/4" x 1 3/4" for each card.  I used a 5 1/2" x 2" Coastal Cabana cardstock piece to back the DSP and then attached them to the card base with adhesive.  This is about 1/2" from the left edge.

Next, that same piece of DSP was turned over and the multi-color print was used.  Isn't this pretty?  These pieces measure 4" x 2 3/4".  Another piece of the Coastal Cabana cardstock is cut to frame this print.  It measures 4 1/4" x 3".  This is also attached to the card front with adhesive overlapping the first color and lying flat.

The sentiment is from the Sketched Butterflies Bundle.  It's stamped with Memento Tuxedo Black ink onto a Basic White cardstock piece.  For added interest, it was die-cut with the Perennial Postage Dies.  Then a Coastal Cabana piece was cut with the next size larger die to frame it.  These are attached together with adhesive.  Set aside until you have the butterflies for the design ready to go.

Melon Mambo cardstock was used for the butterflies on these cards.  There are several butterfly die cutting choices in the Sketched Butterflies Bundle. I used the die with three open-work butterflies attached together.  I thought they looked great on the design.  At this time, the sentiment was placed near the bottom right of the design area and attached with Dimensionals.  For this card, the butterflies are attached with Mini Dimensionals under the two larger bodies.  They look like they are floating over the design.

A group of three Adhesive-backed Sequins Trio in the blue/green tone are added to the design.  I'd planned on using the pink-ish toned sequins, but they just got lost in the print.  It needed something a little bolder to stand out.  Just enough bling.

As you can see, this card is almost identical.  The sentiment layers are attached close to the middle of the multi-colored print layer.  It is attached with Dimensionals also.

The Melon Mambo butterflies are attached slightly differently.  The two outer ones are still attached with Mini Dimensionals.  But the middle butterfly has a Mini Glue Dot holding it down to the sentiment layers.

What do you think?  Do you prefer the sentiment and butterflies to exist on their own?  Or do you prefer them attached?

Be sure to let me know if you think it makes a difference or not.

This card also uses the same sequins.  I think they really make a great accent for the colors on this design.  Love them here!

Thanks for visiting today.  This is one of my favorite templates for making quick cards.  If you've got two prints that coordinate, you're all set to make this.  Hope this bright and spring-y card gets you in the mood for all the spring flowers that should start popping out soon.

This will be my last Host Code used.  There will be no need for them anymore, and everyone that places an order over $20 will receive their own rewards.  You will not have to use them on your next order but can accumulate them for up to a year.  Yay!  Rewards for everyone!  This is coming in mid- April, so I'm sure there will be more updates while we're waiting.  And while you're waiting, check out the new products shown in the Online Exclusives.  Wow, lots of new winners you'll love.  Happy shopping!

Happy stamping and creating,

Sharon