Saturday, December 18, 2021

Peaceful Holly Card

Today I have a bold and bright Christmas card to share with you.  It took me awhile to get it right.   I shared the first version of this with my friend Ruth and my sister Connie.  They both agreed that it was way too busy and really needed help.  Connie and I brainstormed a bit, then I went down to my craft room, tore parts of it off, changed up parts of it and put it back together again.  Both ladies now gave it a thumbs up.  So here it is being shared with you today!

In person, it really is a bold, beautiful card with lots of layering and textures for all of you, like me, who are always 'touching' the cards that come in the mail.  I love the different textures and layers that make a card really stand out as different.

The card starts out with a base of Real Red cardstock that's cut at 8 1/2" x 5 1/2", scored and folded in half.  There is a section of the Painted Christmas 12 x 12 DSP that is cut to 5 1/4" x 4".  This is attached to the folded Real Red card base using MultiPurpose Liquid Glue.

Over this is a section of Real Red cardstock that is 2 1/8" x 4 1/4".  This has two pieces of the 1/4" Gold Shimmer Ribbon wrapped around it and attached on the back.  Then this is attached to the front of the card, just a little lower than center.  To give this area some texture and interest without becoming overpowering, I added a layer of Real Red cut 4" x 1".  Before attaching to the card front, this was embossed with the Tasteful Textiles 3D Embossing Folder.  I think this bit of extra texture really adds so much to the finished look.  If you don't own this embossing folder yet, you need to get one for yourself!  It's such a wonderful basic look that enhances just about any card you might make.

Now on to all the 'fun stuff'!  The sentiment label was cut from Basic White with the Seasonal Labels Dies.  The sentiment was stamped with Real Red ink and is from the Inspired Thoughts stamp set.  A Blending Brush and both Shaded Spruce and Evening Evergreen inks added a little color to the edges.

The holly, berries, and pine needles are all from the Christmas Season stamp set.  The berries were stamped with Real Red, the holly leaves with Shaded Spruce, and the pine needles with Evening Evergreen inks.  Each were die-cut using the coordinating Seasonal Labels dies.  This makes it so easy to add all those wonderful pieces!

All of the stamped and die-cut pieces were added to the card front at this time.  They were either tucked under the sentiment or were attached with Dimensionals over it into a pleasing cluster.  While arranging all the pieces onto the card front, I decided to add 3 of the Gold Holly Leaves.  This brought out the shine of the bands of gold ribbon across the card.

One last picture to show the finished inside of the card.  I had a couple extra holly leaves and one little berry left over.  I couldn't neglect them, so I just had to tuck them in right next to the sentiment.  This sentiment is from the Perfectly Plaid stamp set. I love the font on this Merry Christmas and it seems to be the perfect size to use on so many cards.  For this card, it was stamped with Real Red ink.

As a finishing touch, I had a 1/2" strip of one of the smaller prints from the Painted Christmas Designer Paper.  I thought it was a cute addition to add to the bottom of the Basic White layer and ties all the colors together.

That's it for today.  I know I'm cutting it really close to Christmas for sharing these cards.  But at this point in time, I'm really not making much of anything else.  I'm trying to get all my own cards out in the mail.  Unfortunately, at last count I'm about 15 cards short of my goal.  Guess I need to get back to my craft room and make a few more.  Hope you're farther ahead than I am and have all your Christmas cards out in the mail already.  Oh well, better late than never is going to be my motto this year.  I might even get around to making a cookie batch or two during the Christmas break for the grandsons and they can have some fun helping.  I don't think they'll care too much that the cookies weren't made weeks ago!

Christmas Blessings to you and your family!
Sharon

Thursday, December 16, 2021

Merriest Frames Christmas Card

 Ok, I think I'm back again.  Whew, it's really been an ugly three weeks dealing with the flu.  I'm surprised how badly it knocked me off my feet.  Rick and I are still in the recovery mode trying to get back our full energy.  It's amazing how quickly we tire out doing such little things.  But I wanted to take a minute to thank so many of you that have been keeping us in your prayers every day.  It has really made a huge difference in our lives.  We could have been so much more worse off, but instead we're on our road to full recovery.  Thank you for your prayers and thank God for touching us with His healing hand!

Today I want to share a card I had ready to go and I'm just now getting around to it.  The colors are not your everyday red and green, but I love how the colors interact.  It starts out with a base of Thick White cardstock cut at 8 1/2" x 5 1/2", folded in half.  The first layer on the card is Pool Party cut at 5 1/4" x 4".  This was embossed with Timeworn Type 3D Embossing Folder to give it some lovely texture.  It was attached to the card base using MultiPurpose Liquid Glue.

Next layer is Just Jade cardstock.  Love that color!  I used the Merriest Frames Hybrid Die and Embossing Folder.  Doesn't it give just fantastic detail?  To make it stand out even more, I used a Blending Brush and Just Jade ink on the edges of all the die-cut details.  This was also attached to the card front using MultiPurpose Liquid Glue.

The sentiment is stamped on Basic White cardstock that was die-cut from the Merriest Frames Dies to fit right into the embossed frame.  The words are from two stamp sets, Perfectly Plaid and Heartfelt Wishes.  I thought they went together nicely.  Both Just Jade ink and Polished Pink ink were used for this. 

The accent pieces on the card were cut using the Merriest Frames Dies.  The holly leaves were cut from the retired SAB Be Dazzling Specialty Paper.  They were attached under the flowers using Mini Glue Dots. 

The small poinsettias were cut from Basic White cardstock.  The color is added using a Blending Brush and Polished Pink ink.  The flowers underneath on each of them were colored darker than the top flowers.  I love the extra contrast of the colors on the poinsettias.  Each of the poinsettias were added with a Mini Dimenisonal.  

To add the final bit of glitz, I added the smaller Garden Gems to the center of each flower.  The colors of these gems are just a perfect color touch with an iridescent sheen with the pinks and greens.

Ok, I think I remembered to add all the information on this card.   Surprisingly it's only taken about 4 hours total to get this written.  (I had to take a rest in the middle of it 'cuz I got too tired!  Gee Whiz!!)  Anyway, hope this card inspires you to try different color combos for Christmas.  And consider trying the awesome Merriest Frames Hybrid Dies and Embossing Folder combo.  These really do make up some fabulous images.

Thanks for stopping by today to see what's new.  Thank you also for your prayers and caring.  We truly appreciate all the prayers!  Keep checking in.  Hopefully I'll be back soon with another idea for you to try.  

Stay well and keep creating!
Sharon

Friday, November 26, 2021

Christmas Pines Card

 Hello dear friends.  Hope you had a wonderful, meaningful Thanksgiving.  Did you have a turkey with all the trimmings?  We did, and I think I'm still stuffed.  I might only have enough energy today to type up a blog post, and that's about it.  Today's card is a mix of several die-cutting sets.  Seems like I've been doing that a lot lately.  I start out thinking I will focus on this one set today, and next thing I know I'm pulling out other stamps and/or dies to add to the card.  So I guess you just take my ideas and work with them however it works for you!  That's what usually happens with me.  I see something on my computer upstairs.  By the time I get downstairs and start pulling out stamps and paper, I've totally forgotten just what it was I saw and work out something else entirely.  CASE - Copy And Share Everything is a way of life when it comes to stamping.  We all share, and everyone's ideas seem to come together just a little differently.  And that's part of the magic.

Today's card starts out with a base of Cherry Cobbler cardstock cut 5 1/2" x 8 1/2".  This was scored and folded in half.  

The first layer is Basic White cardstock that was embossed with the Merriest Frames Hybrid Embossing Folder.   This layer had actually been embossed over a week ago.  I had already used the Blending Brushes with Soft Succulent and Evening Evergreen inks to softly color the embossed images.  And I tried to do something with this off and on for the past week with absolutely no success.  How frustrating!  But today my creative muse must have been sitting on my shoulder because the ideas just flowed and here we are!

The coordinating dies have a stitched rectangle that fits inside the embossed frame with some extra room. I die-cut it in Basic White for the sentiment.  Then cut a very thin frame around it with Cherry Cobbler cardstock.  I wanted a specific sentiment for this card, and unfortunately the sentiment is from a retired set - Peaceful Boughs.  I love the wording and use it for my cards each Christmas.  So it was stamped on the white using Cherry Cobbler ink.  Using adhesive, it was attached to the Cherry Cobbler cardstock then set aside until needed.

In the picture here, you can easily see the soft color on the embossed images.  So pretty as is, but I wanted more.

Ok, the next step is where things get a little off the wall.  I wanted to add some greenery under the sentiment layers, but wasn't sure what I wanted to use.  I ended up die-cutting some of the pine needles from Evening Evergreen cardstock with the Christmas Pinecone Dies - the more detailed one.  (2nd die set)  It was too much greenery and covered up the embossed layer, so I cut it apart and attached just sprigs of pine needles behind each corner of the sentiment.  When I added more along the sides, it got overpowering.  So those came off to be used at a later date.  The Christmas Trimmings Dies have some small holly leaves that I die-cut from Soft Succulent cardstock and tried those.  (3rd die set!)  Yay!  Looks like I had a winner!

After attaching the pine needles to the Cherry Cobbler layer, I attached the whole layer to the card front with Dimensionals.  So far it was looking good.  The holly leaves were tucked around the design and attached with a Mini Glue Dot each.

I wanted a bow under the sentiment.  Both the Evening Evergreen and Soft Succulent 3/8" Open Weave Ribbon would work, but I liked the softness of the Soft Succulent color best.  The ribbon was tied into a bow and attached with two Mini Glue Dots.

Now we come to the options of bling or no bling.  And if yes on the bling, which one?  I almost left it plain, but it seems I'm turning into a bling-aholic!!  Oh No!  So after trying several options, I settled on the Holiday Rhinestone Basic Jewels in the Cherry Cobbler tone.  I couldn't stop at my usual three and ended up tucking in five around the design.

Whew, one stamp set, but three different sets of dies to complete this card.  But I love how it turned out!  So it's all worth it, right?  Now I need to get down to my work table and get everything put away again so I can find the top of my table.  What a mess!

Hope you like my card and got a chuckle from my foibles with making it.  I'm sure your card making efforts go much more smoothly than mine.  By the way, my son's down visiting from Michigan and today is his birthday.  Happy Birthday Michael!!!  Man, is he ever getting old!  😏  Oops, I guess that means I'm getting even older!!  ha ha

Hope you're having fun going crazy with all the Black Friday sales.  I'm happy to be tucked in here at home and spending my time creating.

Blessings and love,
Sharon

Wednesday, November 24, 2021

Sweet Gingerbread Card

Hi friends!  It's almost time for Thanksgiving, and that means the Christmas is right around the corner.  And that means that it's time for another Christmas card idea for you.  This one uses an easy fun fold idea that I hope you'll like, along with some sweet gingerbread 'cookies'.  Yum!

Isn't this cute?  I love the 'cookies' that are actually die-cut from the Gingerbread & Peppermint 6" x 6" Designer Series Paper.  It doesn't get too much easier than that.  There's almost no stamping on the card either on the outside or the inside of the card.   Just a little die-cutting and it's just about finished.  Let's get to it...

The card base is Real Red cardstock cut at 11" x 4 1/4".  It's scored at 4" and 9 1/2".  Then both ends are folded in to make the card.  The Heartwarming Hugs 12" x 12" Designer Paper is used to match up with the Gingerbread & Peppermint DSP.  The left hand side of DSP measures 3 3/4" x 4".  The right side measures 1 1/4" x 4".  These pieces were attached using Multi Purpose Liquid Glue.

Ok, now to the fun part.  I knew I was making a number of these cards, so I grabbed the Gingerbread Dies and the Gingerbread & Peppermint DSP and went to work die-cutting a small pile of gingerbread cookies.  I cut stars and snowflakes, ornaments and bells.  And they looked good enough to eat!  They are definitely frosted fancier than any gingerbread cookies I've ever made!!  I also cut some round candies and bits from the leftovers of paper.  So much fun.

I thought the Tailor Made Tags Dies would make a good sentiment layer.  I die-cut the largest tag from the Kraft 6" x 6" Paper Pack in the July-December Mini Catalog.  The Kraft Paper fits in so nicely with the gingerbread theme.  The sentiment is from the Frosted Gingerbread stamp set and is stamped with Early Espresso ink.  I added a short length of Real Red 3/8" Ruffled Ribbon to finish the tag and then used Dimensionals to pop it up on the left side of the card only so it won't seal the card closed.

On this card, I attached two of the snowflakes to the card front.  The one of the right is only attached to the tag and not the right side of the card.  There are Mini Dimensionals under parts of the snowflake on the bottom left.  I added two of the little bits I had die-cut, and 3 Real Red Rhinestones to finish the front.

The inside of the card has a layer of Basic White cut at 5 1/4" x 4".  This has a cute lacy border stamped on the bottom using Crumb Cake ink.  This reminds me of the pretty frosting patterns on the cookies.  The sentiment is from the same set and stamped in Early Espresso ink.  Lastly, three of the die-cut candies were attached in the bottom right corner.  Yes, a card almost good enough to eat.  But please don't.  I'm sure it doesn't taste as good as it looks!  😄

Now I need to get to baking a pie or two and make that jello salad my daughter loves so much.  Lots to do before sitting down to eat that yummy Thanksgiving dinner!  Just counting all the blessings God has showered me with throughout all my life.  Of course there have been many ups and downs over the years.  Who hasn't had them?  But God has been with me every step of the way and continues to bless me each day.  I pray God will bless you this day and touch your heart with His love and grace.

Happy Thanksgiving (a day early)!
Sharon

Tuesday, November 23, 2021

Christmas Pinecones

 Hey there.  Back again with a Christmas card to share today.  I love the Painted Christmas Designer Series Paper and thought it was time to make another card using the gorgeous prints.  After looking through them, I decided on the print with the small pinecone and pine needle clusters all over it.  With that picked out, the rest came together pretty easily.

The card starts with a base of Soft Suede cardstock cut at 11" x 4 1/4", scored at 5 1/2" and folded in half.  I wanted to make the sizing of the layers a little different than the usual, so the Crumb Cake cardstock is  cut at 4 3/4" x  3 1/2".  This way more of the card base shows up to frame the main images.  The DSP print is cut down to 4 1/2" x 3 1/4".   

There's a band across the card that measures 3 1/4" x 1 1/4" and is cut from Evening Evergreen cardstock.  Inside this band is a panel of another print from the same Painted Christmas DSP.  In fact, it's the back side of what I just used on the card front.  I love these two prints together.  I have a feeling I'll have used up all of these two prints before I make much of a dent in the other prints in this package.  Do you find you gravitate to certain prints in each package of Designer Series Paper and tend to use them up before you get to all the others?  Or is that just me??

At this point, the DSP has been attached to the Crumb Cake cardstock with adhesive.  The second print has been attached to the Evening Evergreen band, and this has been attached to the DSP layer with adhesive also.

I didn't want to cover up all the DSP and band, so I chose a smaller sentiment from the Tidings & Trimmings stamp set.  This was stamped on Basic White with Evening Evergreen ink.  It was punched with the Label Me Fancy Punch.  It didn't stand out from the background enough, so I used a Blending Brush and the Evening Evergreen ink to define the outside edge a little.  It was then attached to the card front using Dimensionals.

The pinecones were stamped from the Christmas Season stamp set.  They were stamped on Crumb Cake cardstock using Crumb Cake ink for the bottom layer and Soft Suede ink for the detail layer.  They were die-cut using the coordinating Seasonal Labels Dies.  When trying to get the placement right, I thought it needed a touch of gold to enhance the look.  The berry branch from the Christmas Trimmings Dies was used to die-cut a couple branches from Gold Foil Paper.  These are just tucked in around the pine cones and brighten the whole card up.  The large pine cone was attached with adhesive, but the smaller one was popped up with Dimensionals.  There is a small knot of the 3/8" Open Weave Evening Evergreen Ribbon to accent it.  That's attached with a couple of Mini Glue Dots to hold in place.

The sentiment on the inside was from the Inspired Thoughts stamp set.  It's stamped in Evening Evergreen ink onto a Basic White cardstock piece cut at 5 1/8" x 3 7/8".  The edges of this were also accented with the Blending Brush and Evening Evergreen ink.  It's then attached to a 5 1/4" x 4" layer of Crumb Cake cardstock. Finally it is then attached to the inside of the card, and the card is finished.  One more card down, ready to get addressed and sent out in the mail.  How many more of them do I need to make yet?  Who knows, but I think it's a great, big bunch of them!  Got to keep making those cards...

Hope this card layout gives you some ideas and gets you creating.  It's a similar layout to cards I did earlier in the October, but this time I used DSP instead of stamping underneath the band.  It's a great layout to use when you're stumped for ideas, and you can quite literally come up with hundreds of ways to use it with whatever papers and stamps you have on hand.  The sky really is the limit with this layout.

Just a reminder that if you're placing an order, I'd appreciate you using my Current Host Code tucked at the top right corner on my blog page.  Also, if you'd like to purchase a gift card for a friend or family member for Christmas, I'd be happy to make one up special for you.  Please do it soon, so I can make it and get it to you in the mail in time for Christmas!  We wouldn't want your gift sitting in the Post Office somewhere on Christmas Day.  So let me help you make someone happy for Christmas! 

Thanks for stopping by today.  It was a good day for stamping and sharing.  I need to get in as many ideas as possible before the time runs short.  Keep checking back often to see what's new.

Happy stamping and creating,
Sharon

Sunday, November 21, 2021

Eden's Garden Again

Hi there, and happy Sunday to you.  Hope you had a chance to spend some time communing with God again this morning.  Really looking forward to my Sundays lately, because I'm getting so much out of the Pastor's sermons.  This idea of choosing our 'one person' to pray for every day about having a chance to talk to them about the saving grace of God has been a real thought provoking plan.   To reach at least one person that you really care about for Christ is so powerful.  It's been on my heart for weeks now, and hopefully I can plant seeds that will reap a heavenly reward.

My goodness!  I need to get off my soapbox and get back to sharing what I've been making lately.   I've been playing around some more with the Eden's Garden suite of products.  They're really quite pretty and make card-making easy.  This layout is something I've used so many times in the past, but it always turns out so nicely that I go back and use it over and over again.  

The card base for this card is Soft Succulent and it's cut at 11" x 4 1/4".  It's scored at 5 1/2" and folded in half.  The Basic White layer on the card front is cut 5" x 3 3/4".  

I drew a faint pencil line across this just a little above the center.  This would be my guide for stamping the leafy sprigs across the card.  I started with one of the smaller sprigs and stamped it three times across the top and twice towards the bottom using Soft Succulent ink.  In between these, I stamped the larger sprig with Evening Evergreen ink to fill it in nicely.  

The leafy banner die was used to die-cut a strip of Evening Evergreen cardstock.  Laying it across the card, it just didn't stand out like I had hoped.  So I cut a 1" x 3 3/4" strip of Soft Succulent cardstock to place behind it.  That really made the darker green stand out nicely and showed off the pretty leafy ends.  The Soft Succulent strip was attached to the card front with adhesive.  The dark leafy strip was attached over this using Dimensionals so make it really stand out.

I used one of the sentiments in the Eden's Garden stamp set to coordinate.  A skinny 1/2" strip of Basic White cardstock has the sentiment stamped on it using Evening Evergreen ink.  It was trimmed close to the ends with Paper Snips.  This fit perfectly inside the Evening Evergreen layer and was attached with adhesive.  

Of course it needed some bling, so I added one of the Garden Gems on each end of the Evening Evergreen banner to accent the words.  Then I couldn't stop myself there, and added three more of the iridescent gems to the card front.  Love the bits of bling!  The iridescence really makes them glitter and shine.


Since the outside of the card turned out so nice, I went ahead and stamped the same look inside to match.  The cardstock is cut at 4" x 5 1/4".  The same leafy sprigs were used to stamp off the edge of the bottom.  The same two colors were used too.  I like carrying the outside of the card's into the inside, but sometimes I struggle to find just the right look.  This time it was easy and I love how it turned out too.  The Basic White cardstock piece was attached inside the card using adhesive.  

And there you have it.  A quick and simple card layout that's pretty and looks elegant too.  When you're stuck for some inspiration, try using this layout with different stamps and colors.  I think you might be pleasantly surprised by all the beautiful cards you can make with this plan.

When you place an order this month, please use the Current Host Code shown in the top right corner of the blog page.  I truly appreciate your orders.  It helps to keep me inspired to make more cards to share with you!

Have a very blessed day!
Sharon

Saturday, November 20, 2021

Cork & Leaves for Fall

 Welcome!  Glad you could stop by today for my 100th blog post at this address.  And it only took just shy of a year to do this many.  Hopefully I can keep up the pace and do even more posts in the coming year.  Today I'm sharing one of my Thanksgiving cards that have gone out in the mail yesterday.  I've been working at them 15 minutes here, and another 15 minutes there.  You know, when you've got that stack of cards to make and you can only work on them in snatches of time.  But they're finally finished, and I'm very pleased with the finished card.  It's everything I expected it to be.

One big surprise about making this card - I totally love working with the Cork Paper!  I wasn't even planning on buying it, but I thought it would look great for the background on this card.  So I broke down and made the purchase, and I'm so glad I did.  Yes friends, I struggle with what to purchase too, just like you!  You know I can't just get everything, even though sometimes I'd like to!!  But the Cork Paper has been a lovely surprise and so easy to work with.  Now I need to see what else I can make with it!

The card starts out with Cajun Craze cardstock as it's base.  It's cut at 8 1/2" x 5 1/2" and folded in half.  Then comes the layer of Cork Paper.  This is cut at 5" x 3 3/4" and attached with MultiPurpose Liquid Glue.   Set this aside while doing all the die-cutting.

The wreath comes from the Seasonal Swirls Dies in the July-December Mini Catalog.  There are 3 different wreath dies, and they're all quite different - pine boughs, leaves, or stars, with little bits to coordinate with each wreath to cover all the end of year holidays.  So this is a very versatile set.  I die-cut the wreaths from Soft Suede cardstock.  Again I forgot the Adhesive Sheets on the back until I was almost done, then added it for the last four wreaths I cut.  I think I need to have those Adhesive Sheets setting out on my table at all times so I remember them!!  They do make life easier.

Then on to die-cutting all the leaves. I chose the leaf spray from the Forever Flourishing Dies set.  This gives you lots of leaves for very little effort.  I cut these in So Saffron, Pumpkin Pie, Old Olive, and Cajun Craze cardstocks, one of each color for each card I was making, so there was a goodly stack of them when I was finished.  

Next it was die-cutting the little pumpkin from the Seasonal Swirls Dies.  These were cut from Pumpkin Pie cardstock.  Again, a cute little pile of pumpkins.

Now on to putting it all together.  The wreath went on first with either MultiPurpose Liquid Glue or the Adhesive Sheets where applicable.  I did use the MultiPurpose Liquid Glue to attach each of the leaf sprays, angling them as I stacked them up so all the colors would show.  I attached one pumpkin in the center of each leaf cluster using a Dimensional.  There, that part was finished.

The last thing needed was the sentiment.  It's from the Sparkle of the Season stamp set that coordinates with the dies used.   I chose to stamp it on Bumblebee cardstock using Cajun Craze ink.  Then just trimmed it up with Paper Snips to fit the card.  It was attached with the MultiPurpose Liquid Glue onto the card front. 

No bling on this card for me.  I thought it was perfect just the way it was.  Can you see all the wonderful texture of the Cork Paper?  It looks like little strips of cork with all the texture included.  And the feel of it is wonderful!  I'm so glad I stepped out and tried something new.  It's well worth it!!

And in case you haven't noticed, I've almost switched out entirely to using the MultiPurpose Liquid Glue.  It gives me a bit of wiggle room when attaching layers to get them just right.  And it's great for attaching things with lots of texture.  So if you haven't tried using that yet, give it a try.  Just remember that a little goes a very long way so keep a light touch when applying the glue.

Ok, that's it for another blog post.  Hope you learned something new and are inspired to try out some new products.  It keeps things fresh and exciting.  

If you're ordering soon, please use the Current Host Code shown at the top of the blog page.  I appreciate all of your business and all of you too!  Have fun stamping and creating.  If you have any questions about my projects or ordering, you can always contact me at sharoncarr50@gmail.com.  Or just leave a comment down below and I'll get back to you.  My heart is full to overflowing with thanks for all you wonderful people!  How blessed I am!

With thanks,
Sharon